Editing Non-Audio Data; Confirming Edit Points - Sony SRW-5000 Operation Manual

AUDIO
IN point
Recorder VTR
Player VTR
AUDIO
IN point
Automatic setting of AUDIO OUT points
When the sixth edit point (AUDIO OUT point) is set, the
edit point data is activated and the invalid AUDIO OUT
points are automatically deleted.
AUDIO
IN point IN point
Recorder VTR
Player VTR
AUDIO
IN point
IN point
Automatic setting of edit points by correcting IN
points
When IN points are corrected, the duration in the
uncorrected VTR is used to automatically set OUT points
and AUDIO IN/OUT points.
120
6-1 Basic Automatic Editing
AUDIO
IN point OUT point
OUT point
OUT point
IN point AUDIO
OUT point
Sixth edit point set
AUDIO
OUT point
AUDIO
OUT
OUT point
point
OUT point
AUDIO
OUT point
AUDIO
OUT point
Edit point set
automatically
AUDIO
IN point
IN point
Recorder VTR
Player VTR
AUDIO AUDIO
IN point IN point
IN point IN point
AUDIO
IN point
IN point
Automatically Corrected
set edit point IN point
You can use the VTR SETUP menu to select an audio edit
mode from among cut, cross-fade, and fade-in/out, and set
the duration of the selected edit.
For details, see the menu items in the 300 range in the VTR
SETUP menu.
Using a VTR without the split editing function
If the player VTR does not support the separate setting of
edit points for video and audio, you can set AUDIO IN and
AUDIO OUT points on the recorder and three video edit
points to enable split editing.

6-1-5 Editing Non-audio Data

Before editing non-audio data, set the VTR SETUP menu
item 317 "AUDIO EDIT MODE" to "cut edit".
Note
Noise may be produced during editing of certain non-audio
data.

6-1-6 Confirming Edit Points

Displaying the duration between two edit
points
The following six kinds of duration can be displayed in the
time data display window:
• Between IN and OUT points
• Between IN and AUDIO OUT points
• Between IN and AUDIO IN points
• Between OUT and AUDIO OUT points
• Between OUT and AUDIO IN points
AUDIO
OUT point
OUT point
OUT point
AUDIO
OUT point