Other Items (T01 - Sony HDW-F500 Operation Manual

Menu List

Other Items (T01~)

The values enclosed in a box are the factory settings.
Item number Item
T01 AUTO REPEAT
MODE
T02 INTERNAL VIDEO
SIGNAL
GENERATOR (HD)
T03 INTERNAL VIDEO
SIGNAL LINE
SELECT
T04 INTERNAL AUDIO
SIGNAL
GENERATOR
Note
Items T01, T02, and T04 are reset whenever the power is turned off. Item T03 is maintained even when the power
is turned off.
A-46
Appendix
Settable range Function
[off]
Selects the repeating operation in automatic editing.
on off: Automatic editing is not repeated.
on: Automatic editing is repeated. To stop, press the STOP
[off] Selects the test signal output by the signal generator built
into the VTR.
COLOR BARS
MULTIBURST off: The test signal is not generated, and the VTR operates
10 STEPS
PULSE & BAR
all other settings: The test signal is output from the VTR. At
[RAMP]
BLACK
1035 Selects the effective scanning line number of the test signal
[1080] output by the signal generator built into the VTR.
1035: Sets the effective scanning line number to 1035.
1080: Sets the effective scanning line number to 1080.
Note
This setting is only active when the frame frequency of the
unit is 29.97 Hz or 30 Hz.
[off] Selects the operation of audio test signal output.
silence off: The audio test signal is not output.
1 kHz sine silence: Mute signal.
1 kHz sine: 1 kHz (In this case, a 1 kHz -20 dB FS sine
Note
• When "silence" or "1 kHz sine" is selected, the AUDIO
INPUT/MONITOR SELECT buttons light up.
• When the unit is operated i n the 23.98 PsF or 24 PsF
mode with "1 kHz sine" selected, the output signal is 960
Hz.
button.
normally.
this time it is also possible to record the signal.
wave is supplied to all audio inputs.)