Advanced Settings; Dect Settings; Change Pin; Clock Master - Motorola AXH01 User Manual

10.

Advanced settings

Advanced settings availability are dependent on the CAT-iq base that is being
used.
10.1

DECT settings

10.1.1

Change PIN

Some functions are protected by a 4 digit PIN code which must be entered if
the settings are changed. The default depends on the base. The PIN can be
changed to a preferred number.
When entering a PIN, the digits are shown as ****
1. Press Menu, scroll
DECT Settings
2.
3. Change PIN is highlighted. Press Select.
4. Enter the old PIN and press Ok.
5. Enter the new PIN and press Ok.
6. Re-enter the new PIN and press Save.
e
7. Press to return to standby.
10.1.2

Clock master

The phone can be set so that the base or handset can be the clock master,
once set this will sync across all handset.
Press Menu, scroll
1.
2. DECT Settings
d
3. Scroll to Clock Master
u d
4. Scroll or
e
5. Press to return to standby.
10.1.3

ECO +

You can set the base ECO + mode via this menu, and the transmission power
method depends on the base.
1. Press Menu, scroll
DECT Settings
2.
d
3. Scroll to ECO +
u d
4. Scroll or
e
5. Press to return to standby.
10.1.4

Base version

1. Press Menu, scroll
DECT Settings
2.
d
3. Scroll to Base Version
32
d
to Advanced Settings
is highlighted. Press Select.
d
Advanced Settings
to
is highlighted. Press Select.
and press Select.
Base Handset
to or
d
to Advanced Settings
is highlighted. Press Select.
and press Select.
to De-activate or Activate
d
to Advanced Settings
is highlighted. Press Select.
and press Select.
and press Select.
and press Select.
and press Select.
and press Select.
and press Select.
and press Select.
Advanced settings