Motorola AXH01 User Manual page 8

1. Plug the telephone line cord into the socket marked
base and plug the other end into the telephone wall socket.
2. Plug the AC power adaptor into the socket marked
base and plug the other end into the AC outlet. Switch on the AC power.
3. Plug the Ethernet cable into the socket marked
and plug the other end into the router.
Connecting the charger
1. Plug the AC power adaptor into the socket marked
charger and plug the other end into the AC power outlet. Switch on the AC
power.
Installing and charging the handset
1. Remove the battery cover from the back of the handset and insert
the rechargeable Ni-MH battery cells supplied. Please note the '+' and
'-' markings inside the battery compartment and insert in the correct
direction.
2. Slide the battery cover back into place.
3. If you are charging the batteries for the first time, place the handset on the
charger to charge for at least 16 hours continuously.
4. When the handset is fully charged,
8
on the rear of the base
1
Press down
2
Slide
will appear steady on the display.
on the rear of the
on the rear of the
on the rear of the
Getting started