Clock & Alarm; Set The Date And Time; Set The Alarm - Motorola AXH01 User Manual

7. Clock & alarm
The date and time is set automatically when registered to the base. You can
change the date and time format to show MM/DD or DD/MM and 12 hours or
24 hours.
Note
The phone can be set so that the base or handset can be the clock master,
once set this will sync across all handset. If you have the handset set to clock
master as well as changing the format you can set the date and
time manually.
7.1

Set the date and time

Press Menu, scroll u to
1.
2. Date/Time is highlighted. Press Select.
3. To change the date format, scroll
MM/DD
select either
u
4. Scroll to Enter
27 August 2019 and press Ok.
5. Once the date is set, to change the time format, scroll
and scroll t or u to select either
u
Enter
6. Scroll to
2:30pm and press Save. If the current time format setting is 12 hour, scroll t
or u to select
e
7. Press to return to standby.
7.2

Set the alarm

Press Menu, scroll u to
1.
d
Alarm
2. Scroll to
3. Activation is highlighted, scroll t or u to Off,
d
4. Scroll to highlight
5. Enter the time (HH:MM). If the current time format setting is 12 hour, scroll
t or u to select
d
6. Scroll to highlight
press Save.
e
7. Press to return to standby.
Notes
When the alarm sounds,
screen, press Off or
If the alarm is set to Once,
has sounded once.
If the alarm is set to Daily,
sounded.
Clock & alarm
Clock & Alarm
or DD/MM.
Date, enter the date, e.g. when set to MM/DD, 08/27/19 for
Time, enter the time, e.g. when set to 24 Hours, 1430 for
AM or PM.
Clock & Alarm
and press Select.
Enter Time.
AM or PM.
Ringtone t or u to select the desired ringtone and
will flash and the alarm time displays on the
e
to stop the ring.
will disappear from the screen after the alarm
will remain on the screen after the alarm has
and press Select.
d
to Date Format
12 Hours 24 Hours.
or
and press Select.
Once
and scroll t or u to
d
Time Format
to
or Daily.
25