Dalsa Piranha4 User Manual page 76

76
Full Name External Trigger
Mnemonic stm
Argument(s) Mode
Description Set trigger mode
Notes
Full Name Test Pattern
Mnemonic svm
Argument(s) Mode
Description Select test pattern
Notes
Full Name Default User Set
Mnemonic usd
Argument(s) Set selector
Description Select user set to load when camera is reset
Notes
Full Name Load User Set
Mnemonic usl
Argument(s) Set selector
Description Load user set
Notes
03-032-20274-00
 when off, line rate is controlled by ssf command
 When on, integration starts on rising edge of CC1 signal
 The settings include all those listed by the GCP command plus the
user FPN coefficients, user PRNU coefficients, and color correction
matrix
 Loads and makes current all the settings listed by the GCP
command plus the user FPN coefficients, user PRNU coefficients,
and color correction matrix
Piranha4 8k Color Camera User's Manual
Off
0.
1. On
0: off - sensor video,
1: grey horizontal ramp,
2: white,
3: Grey,
4: black,
5: grey vertical ramp
0. Factory set
1-4. User sets
0. Factory set
1-4. User sets
Teledyne DALSA