Dalsa Piranha4 User Manual page 75

Piranha4 8k Color Camera User's Manual
Full Name Set Line Delay
Mnemonic ssa
Argument(s) mode
Description Sets the number of lines of delay between colors that are read out from
the sensor (default 0).
Notes If your line rate matches the speed of the object, then the value of the
line delay will be 2. Adjust the ssa value until you remove the red and
blue halos above and below a black on white horizontal line in order to
set the line delay. Values entered must be between 0 and 4. Decimal
places are not valid.
Full Name Offset
Mnemonic ssb
Argument(s) Offset
Description Set offset
Notes -4096 in DN12b correspond to -256 in DN8b
Full Name Internal Line Rate
Mnemonic ssf
Argument(s) Line rate
Description Set internal line rate
Notes
Full Name Gain
Mnemonic SSG
Argument(s) 0. Preamp
1. System
2. Contrast expansion
3. Contrast offset
4. Red gain
5. Green gain
6. Blue gain
Description Set gain
Notes
Teledyne DALSA
 Line time > ( Exposure time + 2,500 ns )
0: disabled
1: 0.5 line delay
2: 1 line delay
3: 1.5 line delay
4: 2 lines delay
8 bit -4096 to 4095 step 1 in DN12b
1 to 33,000 [Hz]
0: x1, 1: x2, 2: x4
1024 (x1) to 4095 (x3.999)
1024 (x1) to 65535 (x63,999)
-4096 (-256) to 4095 (255,9375)
1024 (x1) to 4095 (x3.999)
1024 (x1) to 4095 (x3.999)
1024 (x1) to 4095 (x3.999)
75
03-032-20274-00