Setting The System Time - Huawei ViewPoint 8650 V100R008 Quick Start Manual

ViewPoint 8650
Quick Start Guide
Figure 3-6 Network
Step 3 Click the Network Interface tab.
Step 4 Set Slot.
Step 5 Set Network Interface parameters based on the actual settings recorded in
the default settings for other parameters.
Step 6 Click OK.
Step 7 Repeat
----End

3.3.4 Setting the System Time

To start conferences at the correct time, set the 8650 system time to the current time.
Procedure
Step 1 Log in to the 8650 web interface.
Step 2 Choose Settings > System.
Issue 04 (2013-07-20)
Step 2 through Step 6
The IP address of the GE0 port on the GCCA board is used to log in to the 8650 web interface. Keep
record of this IP address.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
to set the IP parameters for GE0 ports in other boards.
3 First Use
Table 3-2. Retain
16