Table of Contents
Advertisement
ViewPoint 8650
Quick Start Guide
Parameter
Protocol type
Participant Number
Participant
Password
IP address
Quality
Step 5 Click OK.
Issue 04 (2013-07-20)
Description
participant that added to
the cascaded conference as
a site in a cascaded
network
NOTE
It is unavailable for conferences
on the built-in web interface.
Lower-level MCU:
participant that added to
the cascaded conference as
a site in a cascaded
network
NOTE
It is unavailable for conferences
on the built-in web interface.
Protocol used by a participant
endpoint. Available values are
H.323 and SIP.
Participant number for the
endpoint. After the endpoint
registers with a GK, this
number can be used to call the
endpoint.
Password used for the
authentication performed
when a participant endpoint
registers with a GK. This
password must be the same as
the password defined on the
participant endpoint.
The IP address of an endpoint
to be added.
It specifies the audio-visual
parameters and transmission
rate of the conference. The
higher the level, the better the
audio-visual experience.
NOTE
Make sure that the endpoints
support the audio-visual
protocol, format and participant
rate when Quality is set to
Custom those parameters are
available to be set.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Holding a Conference on the Web Interface
Setting
Select H.323.
NOTE
If a GK is enabled for a conference,
enter the value of E.164, which is
predefined when
Registration Parameters on a
Videoconferencing
Example: 0100001
Set this parameter to the value of
Password described in
Setting GK Registration
Parameters on a
Videoconferencing
Example: 123456
Example: 200.54.10.137
Default value: High
4.2.1 Setting GK
Endpoint.
4.2.1
Endpoint.
26
Advertisement
Table of Contents
