Huawei ViewPoint 8650 V100R008 Quick Start Manual page 25

ViewPoint 8650
Quick Start Guide
1.
Figure 4-3 Endpoint login page
2.
Step 2 Choose System Settings > Protocol > H.323/SIP Settings.
The page that contains the H.323 area is displayed, as shown in
Figure 4-4 H.323 parameters
Step 3 Set the parameters listed in
Table 4-4 H.323 parameters
Parameter
Enable GK
Issue 04 (2013-07-20)
In the browser address box, enter the endpoint IP address. Press Enter.
The login page shown in
Set User name and Password. Click Log In.
Table
Description
Whether the endpoint registers with the GK.
 Enable: The endpoint registers with the
GK after being started. The GK
functions as a bridge to transfer call
information between videoconferencing
endpoints and the MCU, translates the
addresses of the videoconferencing
endpoints and MCU, and controls calls
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Holding a Conference on the Web Interface
Figure 4-3 is displayed.
4-4.
Figure 4-4.
Setting
Set this parameter to Enable.
22