Huawei ViewPoint 8650 V100R008 Quick Start Manual page 22

ViewPoint 8650
Quick Start Guide
Table 4-2 Component data plan
Component
8650
GK
HUAWEI ViewPoint
9000 HD
videoconferencing
endpoint 1
HUAWEI ViewPoint
9000 HD
videoconferencing
endpoint 2
Setting GK
The GK functions as a bridge to transfer call information between videoconferencing
endpoints and the MCU, translates the addresses of the videoconferencing endpoints and the
MCU, and controls calls and bandwidth. The 8650 supports Built-In GK, you can set the
Built-In GK enabled and registers 8650 with it.
Step 1 Enable Built-In GK.
1.
2.
3.
4.
Step 2 Register with GK.
1.
2.
3.
Table 4-3 Gatekeeper parameters
Parameter
Register with
Gatekeeper
Issue 04 (2013-07-20)
IP Address
200.54.0.120
200.54.0.120
NOTE
200.54.10.137
200.54.10.138
Log in to the MCU web interface.
Choose Gatekeeper > Settings.
Select Enable Built-In Gatekeeper and set GK ID to GK1.
Remain other parameters the default values.
Click OK.
Log in to the MCU web interface.
Choose Settings > H.323 and SIP > Gatekeeper.
Set GK parameters listed in
Description
Whether the MCU registers with a GK.
 Selected: The MCU registers with a GK. After the
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Holding a Conference on the Web Interface
Use the embedded GK of
the 8650.
Table 4-3 and other parameters to the default values.
Other Configuration
None
None
 Site name: site1
 GK address: 200.54.0.120
 Site number: 0100001

GK authentication name:
terminal1
 Site name: site2
 GK address: 200.54.0.120

Site number: 0100002

GK authentication name:
terminal2
Setting
Select this
option.
19