Table of Contents
Advertisement
Only qualified personnel should install the 6E233-49 SmartSwitch.
Depending on the firmware version used in the SmartSwitch, some features described in this
document may not be supported. Refer to the Release Notes shipped with the SmartSwitch to
determine which features are supported.
This chapter provides the instructions required to install the 6E233-49 SmartSwitch. Follow the
order of the sections listed below to ensure a proper installation:
•
Required tools
(Section
•
Unpacking the 6E233-49 SmartSwitch
•
Installing Options
(Section
•
Installing the 6E233-49 SmartSwitch in the 6C105 chassis
•
Connecting to the network
3.1
REQUIRED TOOLS
A Phillips screwdriver is required to install the HSIMs in the 6E233-49.
3.2
UNPACKING THE 6E233-49 SMARTSWITCH
1.
Open the box and remove the packing material protecting the module.
2.
Verify the contents of the carton as listed in
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Important Notice
3.1)
(Section
3.2)
3.3)
(Section
3.5)
Table
Installation
(Section
3.4)
3-1.
Installation
3
3-1
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the 6E233-49 SmartSwitch 6000 and is the answer not in the manual?
Questions and answers