ATTACK DPX COMBI PELLET Series Instructions For Use Manual page 17

Table of Contents

Advertisement

The bigger volume of the accumulation tank, the less risk of overheating. With the larger capaci-
ty of the accumulation tank is the loading time shorter.
Note:
It should be noted that the above is only relevant in the operation of boiler with WOOD.
In operation of PELLETS it loses meaning, the boiler need not be connected to the accumu-
lation tank, but the boiler have to operate always only with PELLETS.
The ATTACK accumulation tanks available*
AK
AS
200
200
300
300
400
400
500
500
800
800
1000
1000
1500
1500
2000
2000
2500
2500
3000
3000
4000
4000
5000
5000
AK – standard accumulation tank designed for accumulation of heating water
AS – accumulation tank for accumulating of heating water, equipped with a heating coil for
connection to solar panels
HR – combined accumulation for accumulation of the heating water as well as for preparation
of the D.H.W. by an internal enameled exchanger
HRS – combined accumulation for accumulation of the heating water as well as for preparation
of the D.H.W. by an internal enameled exchanger, equipped with a heating coil for connection to
solar panels
TUV – accumulation tank for accumulation of the heating water as well as for the D.H.W. prepa-
ration in a water coil
TUVS – accumulation tank for accumulation of the heating water as well as for the D.H.W.
preparation in a water coil, equipped with a heating coil for connection to solar panels
S – accumulation tank with internal disk and stratification pipe (based on the type AK) that al-
lows layering of water as necessary (different water temperature on inputs as well on outputs)
SS – accumulation tank with internal disk and stratification pipe (based on the type AS and S),
equipped with a heating coil for connection to solar panels
* It is possible to cover required volume for required accumulation of energy by one or several accu-
mulation tanks. Accumulation tanks can be connected together to create required volume of accu-
mulation water. Therefore, if you decided that your accumulation volume will be 2 000 l, you can buy
a single accumulation tank of 2 000 l or two accumulation tanks with a capacity of 1 000 l and con-
nect them together.
HR
HRS
600
600
800
800
1000
1000
1250
1250
1500
1500
2000
2000
TUV
TUVS
500
500
600
600
800
800
1000
1000
1250
1250
1500
1500
2000
2000
EN
S
SS
500
500
800
800
1000
1000
1250
1250
1500
1500
2000
2000
16

Advertisement

Table of Contents
loading

Table of Contents