System Requirements; Features - CYP PU-8H8HBTE Operation Manual

4. SYSTEM REQUIREMENTS

‡ HDMI equipped input source devices with HDMI cables
‡ HDMI equipped output displays (TVs or monitors) or HDMI equipped
AV receivers with HDMI cables
‡ Industry CAT5e/6/7 cables

5. FEATURES

‡ HDMI, HDCP1.1 and DVI compliant
‡ Supports HDMI 3D features
‡ Supports resolutions VGA~WUXGA and 480i~1080p dependent upon
the output display's EDID settings
‡ Supports distances up to 100 meters through CAT5e/6/7 cables
‡ Supports 3D signal display dependent upon the output display EDID
settings
‡ Supports PoE (Power over Ethernet) on compatible receivers only
‡ Supports HDMI input up to 15 meters at 8-bit resolution or 10 meters
at 12-bit resolution
‡ Supports IR in/out from input and output locations
‡ Supports RS-232(include Telnet), remote control and on-panel
control
‡ Supports IP function through the single LAN port
‡ 8 VL]H GHVLJQ
‡ 6XSSRUWV H[WHUQDO DQG LQWHUQDO (',' VHWWLQJV
‡ Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD
Master Audio transmission
Note: 1. The PoE function is designed for powering compatible
receiver units only³non-PoE receivers will need their own
power supply.Receivers of another brand may not be
compatible.
2. LAN/CONTROL port must not miss connected with CAT
outputs, doing so will destroy the device.
2