Programming A Series Of Commands For The Component Labels - Sony RM-VL1000T Operating Instructions Manual

Executing a Series of Commands
— System Control Functions
(continued)
5
Select the macro number of
which System Control
function you want to erase
by pressing the Label Select
button.
SYSTEM
SET
CLEAR
SONY OFF
SYSTEM2
SYSTEM3
SYSTEM4
While erasing
SYSTEM
SET
CLEAR
COMPLETE
R R R R
R R R
R R R
SYSTEM2
When erasing finishes,
"COMPLETE" is displayed
with a beep sound.
If you want to erase the
settings of other macro
numbers
Repeat Step 5.
6
Press the SET button.
The display returns to the previous
one.
40
Programming a series of
commands for the
component labels
You can also programme a series
of operating commands
(component macro) for the
component labels (up to 32 steps).
To execute a series of operating
commands for a component label,
proceed as follows.
1 When the display for
component operation appears
(if not, press the SET button
repeatedly), press the COMPO
button.
2 Select the component label by
pressing the Label Select button
for more than a second.
Notes
• The programmed commands are
executed when you select a
component label by pressing the
Label Select button for more than a
second.
When you press the Label Select
button for less than a second, the
selected label works as the normal
component label, and the
corresponding function labels are
displayed.
• The component macro executing time
is variable by changing the setting
(page 43).
• See also "About the interval between
operation steps" on page 37 and
"Notes on System Control
Operations" on page 38.