Sony RM-VL1000T Operating Instructions Manual page 3

Integrated remote commander
Table of Contents

Advertisement

Features
The RM-VL1000T Remote
Commander provides centralized
control of all your AV components
from a single remote commander
and saves the trouble of operating
different AV components with
different remote control devices.
The following are its main
features.
Customizing 180 labels of
control keys in the dot matrix
LCD with dot matrix makes label
customizing possible. A total of
180 labels on the LCD, such as
component labels, macro labels,
etc., can be customized. A label of
up to 8 letters with digits,
characters or symbols can be
selected and displayed.
Control of 12 components
Control of a maximum of 12
components (TV, SAT, VCR, DVD,
CD, AMP, etc.) is possible.
Components are selectable with 12
keys on the LCD display by
pressing the Label Select buttons.
This Commander has an LCD
display that changes the label
display according to the selected
component.
Setting a maximum of 36
macro commands of a
maximum of 32 successive
steps
A maximum of 36 macro
commands which provide a
maximum of 32 successive steps
by pressing a single button can be
set (12 system control macros, 12
component macros and 12 timer
macros). Macro execution speed is
changeable.
All power off macro commands
for Sony components are preset at
the factory to the SONY OFF label.
Clock display and timer
function
A maximum of 12 timer macros,
timer control of automatic on/off
and other controls (such as
recording, stopping, etc.) of each
component is possible.
Centralized control of Sony AV
components with this one
remote commander
This Commander is preset at the
factory to operate Sony brand
components, so you can use it out
of the box as a control centre for
your Sony AV components.
Remote control signals for non-
Sony components are also
preset
This Commander is preset for
most major brands components
other than Sony. You can control
your components remotely by
setting their code numbers (page
13).
Learning function for
programming other remote
control signals you need
This Commander has a learning
function to learn remote control
signals to operate non-preset
components or functions (page
23).
In addition, the Commander can
learn remote control signals
(infrared signals only) of non
Audio Visual components such as
air-conditioners, lights, etc.
(Certain appliances or functions
may not be available) (page 28).
Channel macro function allows
you to select a programme
with a single button
Up to 4 key steps can be
programmed on macro labels. If
you set the key operations for
entering a programme number on
a macro label, you can select the
programme by selecting that
macro label (page 48).
LCD display with backlight
The display backlight allows
operation even in the dark.
3

Advertisement

Table of Contents
loading

Table of Contents