Download Print this page

Sony RM-VL1000T Operating Instructions Manual page 41

Integrated remote commander
Hide thumbs

Advertisement

1
In Step 4 (page 35), select
"COMPO" by pressing the
Label Select button.
SYSTEM
SET
SYSTEM
COMPO
Component names are
displayed. The labels for which
a series of commands is
programmed stay lit and others
flash.
2
Select the component for
which you want to
programme a series of
commands by pressing the
Label Select button (for
example, DVD).
SYSTEM COMPO
SET
SYSTEM
TV
SAT1
VCR1
DVD
3
Programme a series of
commands for the
component label by
following the same
procedure of Step 6-8 on
page 36.
4
Press the SET button.
With a beep sound, a series of
operating commands is
registered.
The display returns to Step 2
above.
To clear the component macro
of a label
In Step 2 (page 41), while pressing
the Label Select button
corresponding to the label that
you want to erase, press the
SCROLL button. (The labels for
which a series of commands is
programmed stay lit.)
"CLEAR OK" appears and the
component macro is cleared with a
beep sound.
The cleared label flashes together
with other labels for which a series
of commands is not programmed.
Note
When you select the label for which a
series of commands is programmed,
the 'NG' sound is heard. If you release
the Label Select button then, data is not
cleared and the component macro
signal is transmitted.
Continued
41

Advertisement

loading

  Related Manuals for Sony RM-VL1000T