Operating Your Components With The Remote Commander - Sony RM-AV2100B Operating Instructions (primary manual) Operating Instructions Manual

To check which code number is
set
Press the DISPLAY key in Step 2 and 5.
The code number and "ENTER" appear
twice.
Be sure to press the DISPLAY key after
you have pressed the ENTER key to set
the code number. If you press the
DISPLAY key before the code number is
set, it returns back to the first number at
which you started searching.
Operating Your
Components with the
Remote Commander
When you operate a non-Sony
component, make sure you set the
component code first (page 8).
Example: To play a CD player
1
Press the desired Component
Select button.
The Commander comes on and the
keys for operating the selected
component are displayed.
Continued
13