Vcr 1, 2, 3; Dvd; Vd (Ld Player) - Sony RM-AV2100B Operating Instructions (primary manual) Operating Instructions Manual

VCR 1, 2, 3

KEY DISPLAY FUNCTION
POWER To turn the power on/off
1 – 9, 0, ENTER To change the channel
For example, to change to
channel 5, press 0 and 5 (or,
press 5 and ENTER)
INPUT To change the input mode
DISPLAY To activate the on-screen
display
ANT/SW To switch the antenna output
MENU To call the MENU display
To move the cursor upward
M
m To move the cursor
downward
, To move the cursor to the
right
< To move the cursor to the left
EXECUTE To enter the selection of the
MENU display
m To rewind
N To play
M To fast-forward
REC To record, press N while
pressing REC.** First release
N, then release REC.
x To stop
X To pause
CHANNEL +/– Channel up: +
Channel down: –
**In order to avoid recording by mistake, the
REC key does not work by itself. You can
assign this operation (record) to a single key
using the learning function (page 16).

DVD

KEY DISPLAY FUNCTION
POWER To turn to the power on and
off
1 – 9, 0 Number buttons: To set items
selected from the screen
+10 To select numbers 10 and
above
ENTER To enter a setting or to set
items selected from the screen
AUDIO To change the sound
DISPLAY To show the current play
status on the screen
ANGLE To switch angle
CLEAR To clear the selected
characters from the screen
RETURN To return to the last previous
screen
TITLE To display the title menu
SUB TITLE To switch the subtitle
DVD MENU To display the DVD menu
To move the cursor upward
M
To move the cursor
m
downward
To move the cursor to the
,
right
To move the cursor to the left
<
EXECUTE To execute items selected
from the screen
m To rewind
N To play
M To fast-forward
x To stop
X To pause
> To proceed to the next
location or song
. To proceed to the previous
location or song
Continued
59