Transferring Data Between Remote Commanders; Transferring Data - Sony RM-AV2100B Operating Instructions (primary manual) Operating Instructions Manual

Transferring Data

between Remote
Commanders
You can transfer data, such as learned
signals and component code settings,
between this Commander and another
Sony RM-AV2100 or a Sony RM-VL900
remote commander.
Note on remote commanders
You can transfer data between remote
commanders with the
remote controls cannot be used to
transfer data.
Transferring data
You can transfer the all data of this
Commander or the data of a Component
Select button on this Commander to
another Sony RM-AV2100 or RM-VL900.
To transfer the all data of the
Commander
mark. Other
1
Place the RM-AV2100 head to
head with another remote
commander.
Another remote commander
about 2 – 4 inches
(5 – 10 cm) away
2
While pressing COMMANDER
OFF, press CHANNEL– and
VOLUME–.
3
Press the M key.
M: Transfer data
m: Receive data
RM-AV2100
Continued
41