Operating Your Components With The Remote Commander - Sony RM-AV2500T Operating Instructions Manual

Operating Your
Components with the
Remote Commander
When you operate a non-Sony
component, make sure you set the
component code first (page 8).
TV SAT VCR
1
CD MD
TAPE
Example: To play a CD player
1
Press the desired Component
Select button.
The Commander comes on and the
keys for operating the selected
component are displayed.
2
PROGRAM
3
DVD CBL AMP
M1 M3
M2
2
Press the desired key in the
touch-key display.
When the remote control signal is
sent, is shown on the display.
You may also use the w +/– buttons,
the MUTING button and the
PROGRAM +/– buttons if necessary.
See "Table of Preset Functions" (page
59) for the functions of keys and
buttons for each component.
3
When you are done using the
Commander, press
COMMANDER OFF to power off
the Commander.
Note
The remote control signals may be different for
some components or functions. In this case,
programme the remote control signals with the
learning function (page 15). Note, however,
that components and functions that do not
support the remote control of infrared signals
will not work with this Commander.
Continued
GB
13