Changing The Auto Power-Off Time Of The Commander - Sony RM-AV2100B Operating Instructions (primary manual) Operating Instructions Manual

Remote controls: integrated remote commander
Hide thumbs Also See for RM-AV2100B Operating Instructions (primary manual):
Table of Contents

Advertisement

Changing the Auto
Power-Off Time of the
Commander
The Commander is preset at the factory
to switch the power off automatically
after 10 minutes if left unused (Auto
Power-Off). To change this time, perform
the following procedure.
You can set the Auto Power-Off time up
to 90 minutes, in units of 10 minutes, or
disable the Auto Power-Off function.
Note
The Auto Power-Off function only turns off the
power of the Commander, but not of the
component.
1
While pressing COMMANDER
OFF, press CHANNEL + and
VOLUME –.
The number which shows the current
Power-Off time of the Commander
stays lit, and other numbers flash.
2
Press one of the 1 – 9 keys to
select the Auto Power-Off time, or
press the 0 key to disable the
Auto Power-off function.
For example, to set the Auto Power-
Off time to 20 minutes, press the 2
key.
"2" stops flashing and stays lit.
3
Press COMMANDER OFF.
49

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rm-av2100

Table of Contents