Operating Your Components With The Remote Commander - Sony RM-AV3100 Operating Instructions Manual

Operating Your
Components with the
Remote Commander
When you operate a non-Sony
component, make sure you set the
component code first (page 12).
TV
1
2
MENU
Example: To play a DVD player
1
Press the corresponding
Component Select button or the
Label key for the component you
have set up.
To display and change the Label keys,
press the Mode Display key
repeatedly.
DVD
The Commander comes on and the
keys for operating the selected
component are displayed.
18
STB VCR DVD CD AMP OTHER
COMMANDER
SYSTEM CONTROL
TIMER LIGHT
2 3 MORE
VOLUME CHANNEL
OK
EXIT MUTING RECALL
2
1
OFF
3
3
To change the Label keys, press the
Mode Display key (in this case, DVD)
repeatedly. Each time you press the
DVD key, the display of the Label
keys changes as follows.
DVD
Press the desired key in the
touch-key display.
When the remote control signal is
sent, is shown on the display.
If necessary, you can also use buttons
on the Commander, such as the
VOLUME +/– buttons, the MUTING
button or the CHANNEL +/– buttons,
other than LCD touch-keys.
See "Table of Preset Functions" (page
95) for the functions of keys and
buttons for each component.
When you are done using the
Commander, press
COMMANDER OFF to turn the
Commander off.
COMMANDER
OFF