Location And Function Of Controls - Sony RM-AV2100B Operating Instructions (primary manual) Operating Instructions Manual

Location and Function
of Controls
1 Component display area
Displays the name of the component
selected.
2 LCD touch key display (page 11)
The keys used for operating each
component are displayed.
Note
Do not press the touch keys using sharp
objects such as pins or ball-point pens.
3 SYSTEM CONTROL buttons (page
23)
You can program up to 16 consecutive
key operations to each of the three
SYSTEM CONTROL buttons . You can
automatically carry out the entire
program by pressing one button.
4 LIGHT button (page 50)
Used to light up the LCD display in
the dark. Press the button once to turn
on the light, and once again to turn it
off. You can also set the backlight to
go off automatically after a certain
period of time.
5 COMMANDER OFF button
Turns the power of the Commander
off.
6 Component Select buttons
Selects the component to control.
7 VOLUME +/– buttons* (page 14, 22)
Adjust the volume.
8 MUTING button* (page 14, 22)
Mutes the audio. Press the button
once again to resume at the previous
volume.
9 CHANNEL +/– buttons
Select the channel.
* Note on the VOLUME +/– and
MUTING buttons
The Commander controls or mutes the TV's
volume when you select a visual component.
The Commander controls or mutes the
amplifier's volume when you select an audio
component.
You can change this setting also (page 22).
Note on the power on and off of the
Remote Commander
To turn on the power, press any button except
the COMMANDER OFF button.
To turn off, press COMMANDER OFF, or if
you don't use the Commander, it automatically
turns off after 10 minutes. This interval can also
be changed (page 49).
7