Blackmagicdesign Videohub Installation And Operation Manual page 63

When configuring a Videohub control panel via USB, you can choose DHCP or Static IP. DHCP
automatically obtains all the network settings for your Videohub control panel and is the
easier choice.
If you decide to use a static IP address, please ask your system administrator for a spare IP
address to avoid creating a conflict on your network. You will then need to complete the IP
address, subnet mask and gateway details for your Videohub control panel. You must use a
static IP address if you are connecting directly to an Ethernet-equipped Videohub, such as
Compact Videohub, without using a network switch.
You will also need to complete the IP details for the remote Videohub that you wish to control
with your Videohub control panel. The remote Videohub is the Videohub Server. This could
refer to a Videohub Server computer or an integrated Videohub Server onboard a Videohub
model such as Universal Videohub 72.
The Blackmagic Videohub Hardware Panel Setup automatically
searches your network for any Videohub control panels.
Any Ethernet or USB connected control units will be listed in the
Videohub Control Panels pane with a corresponding icon.
Blackmagic Videohub Hardware Panel Setup network settings.
If you are setting up hardware panel control for an IP Videohub, enter the host computer's
IP address in the 'remote Videohub IP' setting field. The Videohub server shares the same
IP address with the host computer.
Blackmagic Videohub Software 63