Blackmagicdesign Videohub Installation And Operation Manual page 60

pushbutton will illuminate all instances of the source pushbutton, regardless of how deck
control has been configured for each source pushbutton. Similarly if multiple instances of an
output pushbutton appear in the Destinations panel, they will illuminate together when any one
has been selected.
Viewing and Changing Routes
In order to see which video source has been routed to a particular destination, such as a
monitor, press the monitor's pushbutton in the destinations panel. The monitor button and the
associated video source button will simultaneously illuminate, making it immediately obvious
which video source is connected to the video monitor, e.g., a HyperDeck Studio Pro.
In order to change the video source from a HyperDeck Studio Pro to a video camera, press a
camera pushbutton in the sources panel to immediately illuminate the camera pushbutton and
route video to the video monitor. The HyperDeck Studio Pro pushbutton will no longer be
illuminated and will be disconnected from the video monitor.
In order to see which video source has been routed to a video destination, tap a
destination button and the associated video source button will illuminate.
Locking and Unlocking Routes
Locking a destination avoids accidental changes of the video source being routed to that
destination. To lock a route between an input and an output, double-tap the destination
pushbutton. A yellow padlock icon will appear in the top-left corner of the destination
pushbutton and will prevent anyone else from using the destination device until it is unlocked
from your iPad. Double-tap the destination pushbutton again to unlock. Locking a destination
still leaves the associated video source available for routing to multiple destinations
simultaneously.
Locking a route between an input and an output also locks the RS-422 deck control connection
between the two devices. This is to avoid other users accidentally seizing the deck control
belonging to the video source.
The RS-422 connection between the video source and video destination will remain locked
until the destination pushbutton is unlocked.
Blackmagic Videohub Software 60