Installing Interface Cards; Installing A Universal Videohub Power Supply - Blackmagicdesign Videohub Installation And Operation Manual

Table of Contents

Advertisement

Installing Interface cards

Installing a Universal Videohub SDI Interface or Universal Videohub Optical Interface is easy
and the steps are the same for installing each type of interface card.
1
Hold the card in a vertical orientation with the identification LED at the top of the card.
The identification LED looks like a pin hole near the top left of the top connector.
2
Gently insert the card along its guides until it plugs firmly into the PCI slot on the
motherboard.
3
Use a number 02 size Pozidriv screwdriver to secure the card to the Universal
Videohub frame.
Pages 29-29 provide information on the different interface cards available for your
Universal Videohub.

Installing a Universal Videohub Power Supply

The Universal Videohub Power Supply package consists of a power card, a power cable and a 1
RU chassis containing the power supply. A second Universal Videohub Power Supply can be
installed under the first power supply for failover redundancy. You will need to provide a
standard IEC cord with a C13 connector for each power supply.
1
Ensure that any new power supplies are disconnected from any electrical source.
Orient the power card so that the MAIN POWER label appears at the top of the card.
2
Insert the power card into either of the two power card slots.
3
Use a number 02 size Pozidriv screwdriver to secure the power card with its two
screws. If you have a second power card, install it now into the spare power card slot.
4
Connect the power cable from the power card to the power supply. Tighten the thumb
screws on both power connectors. Repeat this step if you have a second power card
and second power supply. It does not matter which power card connects to which
power supply.
5
Connect an IEC cord from each power supply to a mains wall socket and turn on
the power.
Congratulations! Your Universal Videohub 288 is now ready to start routing video!
Installing a Universal Videohub SDI Interface Card.
Universal Videohub Routers
30

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents