Universal Videohub 72 - Blackmagicdesign Videohub Installation And Operation Manual

9 To install the Universal Videohub 72 Crosspoint card, hold the card in a vertical
orientation by its two levers. The BNC, Ethernet and other ports should be towards
the bottom end of the card. Gently insert the unit into its slot, below the additional
supporting bridge, and ensure the top and bottom edges of the card follow the black
guides. Now firmly push both levers flat to fully engage the multi-pin connectors
with the motherboard. Mating pins ensure that the card precisely engages with the
motherboard without damaging the multi-pin connectors. Use a number 01 size Pozidriv
screwdriver to secure the screws on the two levers of the crosspoint card.
10 The short length of the Universal Videohub 72 Crosspoint card means that a short
blanking plate should also be installed to cover the rest of the long crosspoint slot. The
short blanking plate can be secured with a number 02 size Pozidriv screwdriver.
11 Use a number 02 size Pozidriv screwdriver to reinstate the blanking plate for the right
crosspoint card slot.
12 Reinstate the blanking plates for the interface card slots for SDI ports 73-216. Interface
cards must only be installed in the bottom row, for SDI ports 1-72, when a Universal
Videohub 72 Crosspoint card is used.

Universal Videohub 72

What you need to get started
Universal Videohub 72 is a medium-sized modular router ideal for growing facilities. It features
an 18 card rack frame that can be filled with any combination of BNC SDI or optical fiber
SDI interface cards. When fully populated with a crosspoint card, a power card, 18 SDI interface
cards and 18 deck control cables, Universal Videohub 72 provides 72 SDI inputs, 72
SDI outputs, 72 bidirectional RS-422 deck control ports, reference input, redundant power
supply options and powerful Videohub routing control software for Mac OS X and Windows.
MAIN POWER
+12V
ALARM
POWER OVERLOAD
REF IN
RS-422
CONTROL
USB DIAGNOSTIC
ETHERNET
Universal Videohub Routers 35