Enabling Os Boot Monitoring Function - NEC Express 5800 Series Installation Manual

Chapter 1 Installing OS 1. Setup Procedure
1.13

Enabling OS Boot Monitoring Function

Enables OS Boot Monitoring feature.
Set OS Boot Monitoring feature to Enabled on BIOS SETUP according to Chapter 1 (1.5 Disabling OS Boot
Monitoring Function). Then, specify the timeout time for OS Boot Monitoring Timeout parameter appropriately.
Tips Specify the timeout time in seconds. Default setting is 600 seconds (10 minutes).
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
59