Installing Additional Packages - NEC Express 5800 Series Installation Manual

Chapter 1 Installing OS

1.11.2 Installing Additional Packages

Connect to the ESXi host from vSphere Client to configure.
1. Set the ft control software Install DVD to the DVD drive of the machine where vSphere Client is
installed.
2. Select the ftSys Management Appliance in the left pane of vSphere Client, and click the CD/DVD
button on toolbar to connect with the DVD drive that contains ft control software Install DVD.
3. Log in to ftSys Management Appliance as a root user.
4. Mount the ft control software Install DVD. When /mnt/cdrom directory exists, the making of the
directory is unnecessary by mkdir command.
# mkdir /mnt/cdrom
# mount /dev/cdrom /mnt/cdrom
5. Run the installer of additional package.
• When ftSys Management Appliance is set as the log server
# /mnt/cdrom/NEC/install.sh
• When a separate Linux server is set as the log server
# /mnt/cdrom/NEC/install.sh –a
6. Select a keyboard layout ("us" for English 101 or "jp" for Japanese 106), and press Enter.
Please choose a keyboard layout: [us(101) | jp(106)]
7. Select a language (English or Japanese) for NEC ESMPRO report table and enter "E" or "J".
Please choose a language for ESMPRO alert messages: [E(nglish) | J(apanese)]
8. The IP address of the ESXi host is displayed.
Make sure that the IP address shown is correct, enter the root password for the ESXi host, and press
Enter.
ESXi host: xxx.xxx.xxx.xxx
Enter the root password:
9. The message prompting you to configure the log server appears. Enter the IP address of log server or
the machine name, and press Enter. You can skip this step and set it later. (In that case, see Chapter
3 (1. Steps for Configuring the Separate Log Server).
56
Important Be sure to connect to the ESXi host from vSphere Client.
Do not connect to the vCenter Server.
Note If using a separate Linux server as the log server, this message will not appear.
Tips NEC ESMPRO Report Table installed in this step is used by NEC ESMPRO Agent. See
Chapter 2 (1.1 NEC ESMPRO Agent) for detail of NEC ESMPRO Agent.
Note The message does not appear when ftSys Management Appliance is configured as the log
server.
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
1. Setup Procedure