NEC Express 5800 Series Installation Manual page 55

Chapter 1 Installing OS
Note If the log server is restarted alone, the log generated during restart is not transferred to log
server.
If the log server is restarted due to restart of ESXi host, the log generated on ESXi host
during the period from the startup of ESXi host to restart of log server, is not transferred to
log server.
If the log server other than ftSys Management Appliance is used and the syslog is to be
transferred via TCP using rsyslog, transferring of log from ESXi host will not be
automatically restarted. Run the following command to reload the syslog daemon.
# esxcli –s <IP address of ESXi server or machine name> system syslog
reload
In any other cases, the logs are automatically transferred from ESXi host when the log
server is started.
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
1. Setup Procedure
55