NEC Express 5800 Series Installation Manual page 19

Hide thumbs Also See for Express 5800 Series:

Table of Contents

Chapter 1 Installing OS

Run POST.

After a while, the following message appears at lower left of the screen.

Press <F2> SETUP, <F4> ROM Utility, <F12> Network

If you press F2, SETUP will start after POST, and the Main menu appears. (You can also start SETUP

by pressing F2 while expanding option ROM.)

< Example >

When you move the cursor onto "Advanced", the Advanced menu appears.

Choose "PCI Configuration" and press Enter.

Tips

For [System Time], use Coordinated Universal Time (UTC). The specified UTC time is

applied to the ESXi host to be installed later. In ftSys Management Appliance or other

guest OS, set the time zone for each system.

Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)

1. Setup Procedure

Table of Contents