NEC Express 5800 Series Installation Manual page 39
Hide thumbs
Also See for Express 5800 Series:
- Maintenance manual (160 pages) ,
- User manual (105 pages) ,
- User manual (2 pages)
Table of Contents
Advertisement
Chapter 1 Installing OS
– Set the IP address.
1.
Select [Configure Management Network] and press Enter.
2.
Select [IP Configuration] and press Enter.
3.
Select [Set static IP address and network configuration] and press the space bar.
4.
Enter [IP Address], [Subnet Mask] and [Default Gateway], and press Enter.
5.
In the [Configure Management Network] screen, press ESC to display the confirmation screen. Press
Y to enable the network settings and return to the main menu.
– Follow the steps below when specifying the DNS server.
1.
Select [Configure Management Network] and press Enter.
2.
Select [DNS Configuration] and press Enter.
3.
Enter [Primary DNS Server], [Alternate DNS Server] and [Hostname], and press Enter.
4.
In the [Configure Management Network] screen, press ESC to display the confirmation screen. Press
Y to enable the network settings and return to the main menu.
– Follow the steps below when configuring the settings for searching the DNS domain.
1.
Select [Configure Management Network] and press Enter.
2.
Select [Custom DNS Suffixes] and press Enter.
3.
In the [Custom DNS Suffixes] dialog box, enter one or more DNS suffixes and press Enter.
4.
In the [Configure Management Network] screen, press ESC to display the confirmation screen. Press
Y to enable the network settings and return to the main menu.
Note
Set a static IP address instead of using DHCP.
Important
The ESXi host and ftSys Management Appliance must exist on the same network.
Note
If the IP address is changed after installation, perform steps described in Chapter 1 (2.3.1 If
the ESXi Host IP address or root user password has been changed).
Important
Specify the DNS server from which you can obtain a correct hostname and IP
address. If an inappropriate DNS server is specified, installation may fail.
Note
You can configure the DNS server after completion of installation.
If the host name is changed, perform steps described in Chapter 1 (2.3.1 If the ESXi Host
IP address or root user password has been changed).
Important
If an inappropriate DNS domain is specified, installation may fail.
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
1. Setup Procedure
39
Advertisement
Table of Contents
