Tape Playback; To Select A Reverse Mode; To Select A Playing Deck; To Start Play When The Power Is Off (Direct Play Function) - Aiwa NSX-A707 Operating Instructions Manual

INSERTING TAPES
4
lJecK 1
---
REV MODE
(DD;[c'
Deck 2
On deck 1, tapes are always played back on both sides.
On deck 2, you can select a reverse mode to play back one or
both sides.
Use Type I (normal), Type II (high/CrOz) or Type IV (metal)
tapes for playback,
1
Press TAPE and
cassette holder.
press A EJECT to open the
Insert a tape with the exposed side down. Push the cassette
holder to close.
2 Press <F to start play.
The tape counter indicates the
Playing deck number
tape running length,
To select a reverse
mode
(deck 2 only)
Each time REV MODE is pressed, the reverse mode changes.
To play one side only, select Z.
To play from front side to reverse side once only, select Z).
To play both sides repeatedly, select C=).
When tapes are loaded in both decks, 1) on the display
indicates Continuous Play.
To select a playing
deck
When tapes are loaded in both decks, press TAPE first to select
a deck.
The selected deck number is displayed.
To
stop play, press W.
To pause play (deck 2 only), press II. To resume play, press
again,
To change the playback side, press 4 F DIRECTION/PRESET
in play or pause mode.
To fast forward or rewind, press+ or -. Then press to
stop the tape.
To start play
when
the power is off (Direct Play Function)
Press TAPE. The power is turned on and play of the inserted
tape begins.
To set the tape counter to 0000
Press W CLEAR in stop mode.
The counter is also set to 0000 when the cassette holder is
opened and closed.
Playback side indicator
F: The front side is being played (forward).
4: The back side is being played (reverse).
13
ENGLISH