Remote Control; Connect The Ac Cord To An Ac Outlet; When To Replace The Batteries; To Use Shift On The Remote Control - Aiwa NSX-A707 Operating Instructions Manual

2
Ccrrrnect thesupplied antennas.
Connect the FM antenna to FM 75 Q terminals and the AM
antenna to AM LOOP terminals,
AM antenna
R
FM antenna
11(
pfl
~oop [
rb
7rF~
,50 [
Inserting batteries
Detach the battery cover on the rear of the remote control and
Wllll Ill
inserf two R6 (size AA) batteries.
3 Connect the AC cord to an AC outlet.
To position the antennas
FIM feeder antenna:
Extend this antenna horizontally in a T-shape and fix its ends to
the wall.
AM antenna:
Position to find the best possible reception.
To stand the AM antenna on a surface
Fix the claw to the slot.
[m3
Be sure to connect the speaker cords correctly. Improper
(connections can cause short circuits in SPEAKERS terminals.
Do [not leave objects generating magnetism, such as credit
cares, [near the speakers, as these objects may be damaged.
Do not bring the FM antenna near metal objects or curtain rails.
Do not bring the AM antenna near other optional equipment,
the stereo system itself, the AC cord or speaker cords, since
noise will be picked up.
Do not unwind the AM antenna wire.
R6(AA)
When to replace the batteries
The maximum operational distance between the remote control
and the sensor on the main unit should be approximately 5 meters
(16 feet). When this distance decreases, replace the batteries
with new ones.
To use SHIFT on the remote control
Buttons @ have two different functions. One of these functions
is indicated on the button, and the other on the plate above the
button.
To use the function on the button, simply press the button.
To use the function on the plate above the button, press the
button while pressing SHIFT.
+*/E PRESET on the remote control
The function is same as that of +b on the main unit.
SHIFT
FUNCTION
m
If the remote control is not going to be used for an extended
period of time, remove the batteries to prevent possible
electrolyte leakage.
The remote control may not operate correctly when:
- The line of sight between the remote control and the remote
sensor inside the display window is exposed to intense light,
such as direct sunlight
- Other remote controls are used nearby (those of a television,
etc.)
ENGLISH
4