Side-By-Side Installation - YASKAWA FSDrive-MV1000 Series Instructions Manual

2.2 Mechanical Installation

◆ Side-by-Side Installation

"Side-by-side" installation means a configuration in which a transformer panel, Power Cell panel and control panel
delivered as separate units are installed within one panel or by wiring between panels.
The following models are installed side by side in a block construction (Table 2.10).
2-kV class: 700 to 2750 HP
3-kV class: 1150 to 3700 kVA
4-kV class: 1250 to 5000 HP
6-kV class: All models
11-kV class: All models
Note: Models other than those indicated above are delivered with the transformer panel, Power Cell panel and control panel integrated
within a single frame.
On these models, eight holes are provided each on the transformer panel frame and Power Cell panel frame (refer to the
figure below).
Use M10 × 30L bolts, washers, S-washers, and nuts to join the sections.
Figure 2.21
2.4kV
Transformer panel frame Power Cell panel frame
Arrows: Positions of bolts
Figure 2.21 Mounting Holes for Side-by-Side Installation (Drive: 2-kV Class, 700 HP)
Figure 2.22
3.0kV
Transformer panel frame Power Cell panel frame
Arrows: Positions of bolts
Figure 2.22 Mounting Holes for Side-by-Side Installation (Drive: 3-kV Class, 1150 kVA)
56 YASKAWA ELECTRIC EZZ010926 FSDrive-MV1000 Instructions