2.2 Mechanical Installation
1. Attach the wire ropes for lifting to the support hooks on the top of the panel to lift the drive.
Figure 2.5
Support hooks
(4 pieces)
Support hook
installation opening
2. Ensure that the hanging angle is no greater than 60
46
Table 2.6 Transportation Procedure 1 (Class: 3 kV)
Transportation Procedure
Top view
Pass the wire rope
through the support
hook while lifting it.
Figure 2.5 Inserting Wire Ropes for Lifting
.
°
Wire ropes for lifting
Drive
Front view
YASKAWA ELECTRIC EZZ010926 FSDrive-MV1000 Instructions
Hanging angle
of 60° max.