Basic Setting Of The Machine Drive Unit (Only Pfaff 333-712/02) - Pfaff 333-712/02 Instruction Manual

8 Basic setting of the machine drive unit
.07
Switch on the machine.
2 x
Press TE/Speed key twice to call up the input mode.
By pressing the corresponding +/- key, call up parameter "798" and select service level
"C", see Chapter 12.06.01 Selecting the user level.
By pressing the corresponding +/- key, call up parameter "799" (selection of the machine
class).
By pressing the corresponding +/- key, set the value for the parameter at "4".
By pressing the corresponding +/- key, call up parameter "700".
By operating the pedal, sew one stitch.
Turn the balance wheel in the direction of sewing until the tip of the needle is level with the
top edge of the needle plate.
Conclude the adjustment of the sewing motor by pressing the TE/Speed key.
Installation and commissioning
TE
101 on
A
TE
798 11
C
TE
799 4
C
TE
700 0
C
(only PFAFF 333-712/02)
8 - 7