Ingenico Move 5000 User Manual page 91

Mode
You may configure the terminal to use DHCP or Static IP addresses. The initial
screen will display which mode you are in
IP
You may configure the IP address. The initial screen will display which IP address
you are connected to.
Press to clear all digits.
Press to clear one digit at a time.
Press to confirm data.
Page 91
The terminal will
display the
current mode.
Touch the screen
to open the
window
Press to
change to Static
Mode.
Press return
to previous
screen.
The terminal will
display the
current mode.
Touch the screen
to open the
window
Move/5000 User Guide
Press to
change to DHCP
Mode.
Press return
to previous
screen.
Press to exit
function.
Press to
confirm address
or clear the digits
and re-enter new
address.
Copyright© 2019 Ingenico