Ingenico Move 5000 User Manual page 29

Page 29
The terminal will
power cycle.
Type in your
preferred
'Supervisor
Code'.
Asterisks will
appear as you
type in the code.
Press to save
the code.
Re-type your
new 'Supervisor
Code' and then
press to
confirm it.
Press to
acknowledge the
change.
Move/5000 User Guide
The terminal may
then contact any/all
acquirers for
verification.
The 'Logo' and
text 'AUTH
HOST' will differ
for each Acquirer
The terminal will
contact the
configuration
host.
The terminal will upload the
status of its applications and print
a list of card types that will be
accepted.
Terminal will
return to the 'Idle
Screen' if
installation is
successful.
Copyright© 2019 Ingenico