Table of Contents
Advertisement
2.4
Installing System Software
Recent releases of operating systems from major vendors include setup programs
which load automatically and guide you through hard disk preparation and operating
system installation. The guidelines below will help you determine the steps necessary
to install your operating system on the panel PC hard drive.
Note!
Some distributors and system integrators may have already pre-
installed system software prior to shipment of your panel PC.
If required, insert your operating system's installation or setup diskette into the exter-
nal diskette drive until the release button pops out.
The BIOS supports system boots up directly from the USB drive. You may also insert
your system installation USB disk into your external USB drive.
Power on or reset the system by pressing the "F2 or Del" key to boot into BIOS menu
and adjust the boot device sequence.
You can also press F12 key when booting; a bootable device popup menu will
appear, you can select bootable device that you want. The Point-of-Care Terminal will
automatically load the operating system from the diskette or USB Disc.
If you are presented with the opening screen of a setup or installation program, follow
the instructions on screen. The setup program will guide you through preparation of
your hard drive, and installation of the operating system.
2.5
Installing the Drivers
After installing your system software, you will be able to set up the Chipset, Graphics,
Ethernet, audio, and touchscreen functions from your own external USB drive. All the
drivers except the USB drive driver are stored in a USB disc entitled "Drivers and Util-
ities."
The standard automatic installation procedures for installing the chipset, graphics,
audio, Ethernet, TXE and touch drivers are described in Chapter 3.
The various drivers and utilities in the USB disc have their own text files which help
users install the drivers and understand their functions. These files are a very useful
supplement to the information in this manual.
The driver can be downloaded from the following path:
tech.com.tw/support/
Troubleshooting
When system behaves abnormally, such as:
1. Failure to power on
2. Failure to power off
3. Power LED ON but no DC power output
4. AC power in and all switches ON, but system doesn't power on
Contact your distributor, sales representative, or Advantech's customer service cen-
ter for technical support if you need additional assistance. Please have the following
information ready before you call:
Product name and serial number
Description of your peripheral attachments
POC-W243L Series User Manual
12
http://support.advan-
Advertisement
Table of Contents
