Operation Mode Parameters - Festo CP Factory Manual
Basic module linear
Hide thumbs
Also See for CP Factory:
- Manual (126 pages) ,
- Original operating instructions (90 pages) ,
- Manual (39 pages)
Table of Contents
Advertisement
Operation
4.6.6 Operation mode Parameters
Set parameters of the application module on the HMI
To set up the application module, the application module must be set to setup mode.
1. On the Start screen, click Setup
Change to parameter page (1) and select application (2).
62
© Festo Didactic CP Factory ° Basic module linear
Advertisement
Table of Contents
