Security Warnings; Installation Preparation; Verify The Package Contents - Digisol DG-GS4600 SERIES Installation Manual

standard cables and connecters.

After the installation, users should clean the site. Before powering on the switch,
users should ensure the switch is well grounded. Users should maintain the switch
regularly to extend the lifespan of the switch.

2.1.3 Security Warnings


When using SFP transceiver, do not stare directly at the fiber bore when the switch is
in operation. Otherwise the laser may hurt your eyes.

Do not attempt to conduct the operations which can damage the switch or which can
cause physical injury.

Do not install, move or disclose the switch and its modules when the switch is in
operation.

Do not open the switch shell.

Do not drop metals into the switch. It can cause short-circuit.

Do not touch the power plug and power socket.

Do not place the tinder near the switch.

Do not configure the switch alone in a dangerous situation,

Use standard power sockets which have overload and leakage protection.

Inspect and maintain the site and the switch regularly.

Have the emergence power switch on the site. In case of emergence, switch off the
power immediately.
Caution!
Potential risk include: Electric leakage, Power supply arcing, Power line breakage,
Imperfect earth, Overload circuit and Electrical short circuit..If electric shock, fire, electrical
short circuit occurs, please cut off the electricity supply and alarm rapidly. Rescue the
injured person in the contingency under inherently safe, Give the injured person proper
first aid treatment according to the injury state, and seek help from the Medical
Emergency using various ways

2.2 Installation Preparation

2.2.1 Verify the Package Contents

First, open the package; please check the contents of the switch container and
accessory kit. (If you are concerned that any item is missing or an incorrect item has been
supplied, please contact your dealer as soon as possible.)
2-5
Hardware Installation