Emulator Program For The Model 165 - IBM System/370 Manual

unit with the
Data
converter feature is required to process VBS format
tape volumes. Note that VBS format files can also be processed on
direct access devices.
Table 40.15.1. 7094 hardware and I/O devices supported by the 1094
Emulator program for the Model 165
64
7094 Feature
-709/1090/7Q94/7094II system
with 32K words of main storage
and
up
to eight channels
(A through
H)
-129 Magnetic Tape Units (Mixed
parity files - with even BCD
and odd binary parity data - are
supported but mixed density
files are not.)
-711 Card reader
-121 Card Punch
~716
Printer
(Simulation is based on
the assumption of standard
SHARE
2 control board
wiring. )
Model 165 Equivalent
-Model 165 with the 7094 Compati-
bility Feature, 512K (MFT) or
1024K
(MVT)
or more, channels
(2860, 2880, or 2870), and a
MFT or
MVT
operating system that
includes the interval timing,
ATTACH, and IDENTIFY options and
a 7094 Emulator program
-Any System/370 tape unit supported
by
OS BSAM
-Any System/370 direct access
device supported by OS BSAM if
VBS format is used. (Only single-
volume disk data sets are supported.)
-Any card reader or SYSIN device
supported
by
OS QSAM. The Card
Image feature is required to
handle 1094 binary card input.
Binary card input cannot be
handled by the regular reader
interpreter. MVT users can invoke
the ASB reader to read binary card
input in the input stream.
-Any System/310 direct
access device supported
by
OS BSAM. (Only single-
volume disk data sets are
supported. )
-Any card punch or SYSOUT
device supported
by
OS
QSAM. The Card Image
feature is required on a
card punch.
-Any System/310
direct access device
supported by BSAM. (Only
single-volume disk data sets
are supported.)
-~~y
printer or SYSOUT device
supported by OS QSAM.
-Any System/310 direct
access device supported
by
OS BSAM. (Only single-
volume disk data sets are
supported. )
-Any System/310 console.
(Spacing and carriage
control is not provided
if the console is used.)