Table of Contents
Advertisement
BIOS-contained Model Number and Serial
Number
The model number and serial number information is stored in BIOS ROM and
displayed in the "Model Information" of BIOS Setup main menu. If a repair is
completed by replacing the system board or installing a new BIOS ROM, then
you need to enter the original system's model number and serial number in
the new BIOS ROM.
To enter the model number and serial number into BIOS:
1.
Prepare a bootable DOS diskette with VPD.EXE files.
2.
Insert the diskette and boot from drive A.
WARNING: Do not boot with any memory related driver such as
HIMEM.SYS, EMS.SYS ....
3.
At the DOS prompt, type A:>VPD then press Enter. You will be asked if
you want to update the serial number, type Y to continue. When the
screen shows:
Serial Number:
Enter the serial number and press Enter to continue. You can type a
maximum of 7 characters (without spaces).
Follow the instructions on the screen to complete the procedure.
4.
Type A:>VPD and press Enter to display and verify your input model
number and serial number information.
1-10
Advertisement
Table of Contents
