Remote Operating Instructions - ADJ SABER BAR 6 User Manual

R E M O T E O P E R A T I N G I N S T R U C T I O N S
RF Remote Control:
to control a variety of ADJ LED Pars from long distance. The remote can control your Saber Bar 6 up
to 75 feet / 25 meters. To use the remote you must first activate the RFActive mode on the fixture.
To activate the receiver please see the menu and instructions on
pages 15-17.
• Blackout – Pressing this button will blackout the fixture.
• Fade – This button will activate the auto fade program.
• Color – This button will activate the dimmer mode. Use the
"+" and "-" buttons to scroll through the brightness and find
your desired light output.
• Programs – This button will activate the built in strobe
mode. Use the "+" and "-" buttons to scroll through the
strobe frequency.
• Sound Active – This button activates the Auto Speed
mode. Use the "+" and "-" buttons to scroll through the
speed.
• Auto Run – This button will run an automatic program. Use
the "+" and "-" buttons to adjust the speed of the auto run.
• "+" And "-" – Use these buttons to adjust the speed of the
Auto Run scroll
The Dotz Par RF wireless remote has many different functions and allows you
23