ADJ SABER BAR 6 User Manual page 17

S Y S T E M M E N U
MENU Function: (continued)
LCD Set: This mode allows the user to select display options, key lock, flash and display inverse.
Temp. C/F: This mode allows the unit to display the current temperature in Celsius or Fahrenheit.
Dim Mode: The Dim Mode allows you to select one of the following preset dimming modes: See
page 22 for dimming curve chart.
MasterSW: This mode allows the user to turn ON/OFF the DMX signal output when in Master Mode.
DimCurve: This mode allows the user to select one of four dimmer curve options.
Frequen: This mode allows the user to select the desired frequency/flicker.'
Flip: This mode allows the lighting to be sequenced 1,2,3,4,5,6 (standard) to 6,5,4,3,2,1 (flip).
RFActive: This mode allows you to disable or enable the RF remote feature.
Defaults: This option allows you to reset the functions to factory default.
MENU Info:
Time Info: This mode lets the user choose to display Current, Total, or running time since the
Last reset.
Current = Displays the current fixture's running time in hours.
Total = Displays the fixture's total running time in hours.
Last = Displays the fixture's running time (in hours) since the last clear/reset.
Password = Clear 0: (password = 050/060)
Clear = Reset the fixture's Last running
TempInfo: Displays the current temperature of the unit (Celsius or Fahrenheit).
Err. Info: Displays any errors or high temperature.
ModelInf: Displays the unit name (Saber Bar 6).
Software: Current software version(s).
MENU Manual: Adjust Dimmer or Dimmer Fine, White (1-6) values and Strobe.
MENU Program: Auto Programs 1-13, Speed, Fade and Strobe adjustment.
MENU Slave: This mode allows the user to set the unit to Slave mode.
MENU Calibrat: Calibrate the white balance.
time.
17