Chapter 7 - Software Features - DFI KS057R-FS User Manual

Chapter 7 - Software Features

The platform is an embedded system that may be pre-loaded with Yocto 1.8 beta or Android
5.1 beta on the eMMC. This section describes the supported software features of this embed-
ded system.
General Support
Component Name Base-Line Feature
Yocto 1.8 - Kernel 3.14.52 (default preloaded on eMMC)
OS Support
General
Android 5.1.1 - Kernel 3.14.52
Firmware Upgrade (*) MFGTool firmware update tool
Misc
Utilities (*) Hardware diagnostic utilities
(*) This feature depends on NXP's support.
Linux Support
Component Description
Yocto 1.8 - Kernel 3.14.52
Linux
NXP i.MX6 Yocto 1.8 BSP
Support X11 Window
Linux
Support BitBake build tool
AP/API
Support I 2 C, Watchdog and GPIO Provide support console for i.MX6 platform
Android 5.1.1 - Kernel 3.14.52
Android
NXP i.MX6 Android 5.1.1 NXP BSP
Support Android AOSP launcher
Support Android ADB shell
Android
Support Android APK install
AP/API
Support I 2 C, Watchdog and GPIO Provide support console for i.MX6 platform.
(*) This feature depends on NXP's support.
Chapter 7 Supported Software
Chapter 7
Detail
It is an open-source project that delivers a
set of tools which create operating system
images for embedded Linux systems.
Support X-11 Demo Image Only (*)
All library and utility should support (*).
Source code package (support by request)
Support Demo Image
All library, utility and Android apk should
support (*).
Source code package (support by request)
Yocto Support
Component Support Status
1.8
Yocto Version
3.14.52
Kernel Version
X11 without QT5 build
Window System
Support eMMC boot, eMMC v5.1, Linux ext3 file system
eMMC
Support "ping", "ifconfig" console commands verify, static IP/DHCP
Ethernet LAN1
Dynamic IP, fixed MAC address.
Support "ping", "ifconfig" console commands verify, static IP/DHCP
Dynamic IP, fixed MAC address. Due to LAN7500 is PCIe over USB2.0
Ethernet LAN2
Ethernet card, data transfer throughput limit is below 480Mbps (USB2.0
SPEC limitation).
1. Support USB HID Keyboard and Mouse Device
2. Support USB Mass Storage by "mount" console command, EXT3/EXT4/
USB 2.0
FAT filesystem
1. Support USB HID Keyboard and Mouse Device
2. Support USB Mass Storage by "mount" console command, EXT3/EXT4/
USB OTG
FAT filesystem
3. Support connect to PC to update image by i.MX6 MFGTool
Support single display function, need to plug in HDMI cable before power
HDMI Video
on, resolution 1920x1080@60
Output
Support read input voltage, set outpout voltage high/low status, control
DIO
by Linux device node, 4 pins
Support "lspci" console command for check PCIe card status. For standard
Mini PCIe
product, we only port ENLi AP12356 WiFi/BT module.
19
www.dfi.com