Chapter 6 - Mounting Options; Wall Mount - DFI KS057R-FS User Manual

Chapter 6 - Mounting Options

Din-rail Mount
Note:
The system unit used in the following illustrations may not resemble the actual one.
These illustrations are for reference only.
The DIN-rail mount kit includes the following:
• DIN-rail mount brackets
• 4 bracket screws
1. Use the provided mounting screws to attach the DIN-rail mount brackets to the rear side of
the device. Note that the connector panel should be at the bottom.
Din-rail mount bracket
Mounting screws
2. Install the device onto the rail.
Chapter 6 Mounting Options
Chapter 6

Wall Mount

The wall mount kit includes the following:
• 2 wall mount mount brackets
• 4 bracket screws
1. Use the provided mounting screws to attach wall mount brackets to both sides of the device.
The following pictures show the two ways in which the brackets can be attached.
1. Flush with the rear side
186.00
170.20
2. Flush with the front panel
2 Fix the device on the wall. The following picture shows the dimensions and location of wall
mount screw holes.
18
186.00
170.20
www.dfi.com
Unit: mm