Maintenance; Checking For Blockages; Cleaning The Brushroll - Shark Navigator Swivel Pro Complete NV150 Series Owner's Manual

MAINTENANCE

CLEANING THE BRUSHROLL

Using a coin, turn locks counterclockwise, then lift the cover to access brushroll.
DEBRIS WRAPPED AROUND BRUSHROLL
Clean off any debris on the bristles.
s h a r kc l e a n . c o m
DEBRIS BEHIND BRUSHROLL
If you run over a hard or sharp object or
notice a noise change while vacuuming, check
for blockages or objects caught behind the
brushroll.
Clear away any dust, dirt, or blockages in
Debris Intake.
To close the cover, push down until it clicks into
place. Close the locks by using a coin to turn
them clockwise.

CHECKING FOR BLOCKAGES

HOSE BLOCKAGES
Detach hose from vacuum pod, and check hose
and opening on back of pod for blockages.
POD BLOCKAGES
Detach wand from pod, and check opening
for blockages.
DUST CUP BLOCKAGES
Detach dust cup from vacuum pod. Empty dust
cup, remove debris from lint screen, and check for
blockages.
WAND BLOCKAGES
Detach wand from pod and handle, and check both
ends for blockages.
HANDLE/HOSE BLOCKAGES
Detach handle from wand and hose from the
vacuum pod, and check openings for blockages.
s h a r kc l e a n . c o m